Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What happening with PHP?!
#1
Hey guys,

Every time I start dslan_start.bat I get these messages

[Image: 585c4090bc6544ed8805374.png]

And on localhost I getting this error

[Image: d47d9e32ea20441995a960f.png]

I have no idea what to do.

Thanks!
[Image: 6a7a8ab756894695a46e845.png]
Reply
#2
(10.11.2012, 15:28)fakeproduct Wrote: I have no idea what to do.

Just don't mess it up. It looks like you either try to run TWLan on a different apache or you removed the eLoader.dll.
Reply
#3
Yes, I modify something.

At first I had the LIBEAY32.DLL that was corrupted and I replace it with a newer version of it and it was ok.

Then this error occured.
I didn't delete anything
Reply
#4
Ok, list the files located under: dslan/php/ext
And post the contents of dslan/php/php.ini.
I think I can help you then.

Kind Regards
Molt
Reply
#5
[Image: rXVaX.png]

and

[Image: PbFA9.png]
Reply
#6
Uhm... I need the contents of the php.ini ^^
Just open it with a text editor and copy & paste it.
Reply
#7
There are too many contents,

download my ini from here:

http://www.2shared.com/file/JjLaiyPb/php.html
Code:
[PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.


;;;;;;;;;;;;;;;;;;;
; About php.ini   ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior.  In order for PHP to
; read it, it must be named 'php.ini'.  PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory.  The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple.  Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; |        bitwise OR
; &        bitwise AND
; ~        bitwise NOT
; !        boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
;  foo =         ; sets foo to an empty string
;  foo = none    ; sets foo to an empty string
;  foo = "none"  ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).


;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off

; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On

; Allow ASP-style <% %> tags.
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
precision    =  12

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On

; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit.  You can enable output buffering during runtime by calling the output
; buffering functions.  You can also enable output buffering for all files by
; setting this directive to On.  If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = On

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
;       directive. Instead, explicitly set the output handler using ob_start().
;       Using this ini directive may cause problems unless you know what script
;       is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
;       and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
;       Instead you must use zlib.output_handler.
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
;       outputs chunks that are few hundreds bytes each as a result of
;       compression. If you prefer a larger chunk size for better
;       performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
;       output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; Whether to enable the ability to force arguments to be passed by reference
; at function call time.  This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend.  The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration.  You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = On

;
; Safe Mode
;
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here.  By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note:  If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv().  These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <span style="color: ???????"> would work.
;highlight.string  = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg      = #FFFFFF
;highlight.default = #0000BB
;highlight.html    = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long request, which may end up
; being interrupted by the user or a browser timing out.
; ignore_user_abort = On

;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header).  It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time = 60     ; Maximum execution time of each script, in seconds
max_input_time = 60    ; Maximum amount of time each script may spend parsing request data
memory_limit = 16M      ; Maximum amount of memory a script may consume (16MB)


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field.  Or each number up to get desired error
; reporting level
; E_ALL             - All errors and warnings (doesn't include E_STRICT)
; E_ERROR           - fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often result
;                     from a bug in your code, but it's possible that it was
;                     intentional (e.g., using an uninitialized variable and
;                     relying on the fact it's automatically initialized to an
;                     empty string)
; E_STRICT            - run-time notices, enable to have PHP suggest changes
;                     to your code which will ensure the best interoperability
;                     and forward compatibility of your code
; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
;
; Examples:
;
;   - Show all errors, except for notices and coding standards warnings
;
;error_reporting = E_ALL & ~E_NOTICE
;
;   - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
;
;   - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
;   - Show all errors except for notices and coding standards warnings
;
error_reporting  =  E_ALL & ~E_NOTICE

; Print out errors (as a part of the output).  For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below).  Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = On

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed.  It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = Off

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; sourcelines.
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html

; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"

; String to output after an error message.
;error_append_string = "</font>"

; Log errors to specified file.
;error_log = "C:\TribalWars\dslan_v1.4\apache\logs\phperror.log"

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC).  Registration is done from left to right, newer
; values override older values.
variables_order = "EGPCS"

; Whether or not to register the EGPCS variables as global variables.  You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data.  This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on;  Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = On

; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends.  If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = On

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information).  If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
post_max_size = 16M

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = On

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header.  To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On


;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
include_path = ".;C:\TribalWars\dslan_v1.4\php\pear\"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues.  The alternate is to use the
; cgi.force_redirect configuration below
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =

; Directory in which the loadable extensions (modules) reside.
extension_dir = "C:\TribalWars\dslan_v1.4\php\ext\"

; Whether or not to enable the dl() function.  The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers.  Left undefined, PHP turns this on by default.  You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution.  Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client.  This allows IIS to define the
; security context that the request runs under.  mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS.  Default is zero.
; fastcgi.impersonate = 1;

; Disable logging through FastCGI connection
; fastcgi.log = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0


;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
upload_tmp_dir = "C:\TribalWars\dslan_v1.4\tmp"

; Maximum allowed size for uploaded files.
upload_max_filesize = 16M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Define the anonymous ftp password (your email address)
;from="john@doe.com"

; Define the User-Agent string
; user_agent="PHP"

; Default timeout for socket based streams (seconds)
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
;   extension=modulename.extension
;
; For example, on Windows:
;
;   extension=msql.dll
;
; ... or under UNIX:
;
;   extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here.  Specify the location of the extension with the
; extension_dir directive above.


; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.

;extension=php_apd.dll
;extension=php_bcompiler.dll
;extension=php_bitset.dll
;extension=php_blenc.dll
;extension=php_bz2.dll
;extension=php_bz2_filter.dll
;extension=php_classkit.dll
;extension=php_cpdf.dll
;extension=php_crack.dll
;extension=php_curl.dll
;extension=php_cvsclient.dll
;extension=php_db.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_dbx.dll
;extension=php_dio.dll
;extension=php_docblock.dll
;extension=php_domxml.dll
;extension=php_event.dll
;extension=php_fdf.dll
;extension=php_fileinfo.dll
;extension=php_filepro.dll
;extension=php_filter.dll
;extension=php_fribidi.dll
extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_gopher.dll
;extension=php_hash.dll
;extension=php_http.dll
;extension=php_hyperwave.dll
;extension=php_ibm_db2.dll
;extension=php_id3.dll
;extension=php_ifx.dll
;extension=php_iisfunc.dll
;extension=php_imagick.dll
;extension=php_imap.dll
;extension=php_ingres.dll
;extension=php_interbase.dll
;extension=php_ixsfunc.dll
;extension=php_java.dll
;extension=php_ldap.dll
;extension=php_lzf.dll
;extension=php_mailparse.dll
;extension=php_maxdb.dll
;extension=php_mbstring.dll
;extension=php_exif.dll
;extension=php_mcrypt.dll
;extension=php_mcrypt_filter.dll
;extension=php_memcache.dll
;extension=php_mhash.dll
;extension=php_mime_magic.dll
;extension=php_ming.dll
;extension=php_msql.dll
;extension=php_mssql.dll
;extension=php_mysqli.dll
;extension=php_netools.dll
;extension=php_ntuser.dll
;extension=php_oci8.dll
;extension=php_oggvorbis.dll
;extension=php_openssl.dll
;extension=php_parsekit.dll
;extension=php_pdf.dll
;extension=php_pdo.dll
;extension=php_pdo_firebird.dll
;extension=php_pdo_mssql.dll
;extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_oci8.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
;extension=php_pdo_sqlite.dll
;extension=php_perl.dll
;extension=php_pgsql.dll
;extension=php_phpdoc.dll
;extension=php_pop3.dll
;extension=php_printer.dll
;extension=php_pspell.dll
;extension=php_radius.dll
;extension=php_runkit.dll
;extension=php_sdo.dll
;extension=php_sdo_das_xml.dll
;extension=php_shmop.dll
;extension=php_smtp.dll
;extension=php_snmp.dll
;extension=php_soap.dll
extension=php_sockets.dll
;extension=php_sqlite.dll
;extension=php_ssh2.dll
;extension=php_stats.dll
;extension=php_sybase_ct.dll
;extension=php_threads.dll
;extension=php_tidy.dll
;extension=php_timezonedb.dll
;extension=php_translit.dll
;extension=php_win32ps.dll
;extension=php_win32scheduler.dll
;extension=php_win32service.dll
;extension=php_win32std.dll
;extension=php_xdebug.dll
;extension=php_xmlreader.dll
;extension=php_xmlrpc.dll
;extension=php_xmlwriter.dll
;extension=php_xsl.dll
;extension=php_yaz.dll ; Module make problems
extension=php_zip.dll
;extension=php_zlib_filter.dll


;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
;date.timezone =

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables  = Off

[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25

; For Win32 only.
;sendmail_from = me@example.com

; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path = "C:\TribalWars\dslan_v1.4\sendmail\sendmail.exe -t"

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db    =  Not yet implemented
;odbc.default_user  =  Not yet implemented
;odbc.default_pw    =  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links.  -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields.  Returns number of bytes to variables.  0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect().  If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

; Maximum time (in secondes) for connect timeout. -1 means no limit
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off

[MySQLi]

; Maximum number of links.  -1 means no limit.
mysqli.max_links = -1

; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306

; Default socket name for local MySQL connects.  If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =

; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password!  And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
msql.max_links = -1

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links.  -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings.  This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
browscap = "C:\TribalWars\dslan_v1.4\php\browscap\browscap.ini"

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =

; Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent).  -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns.  May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1.  In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler.  In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; As of PHP 4.0.1, you can define the path as:
;
;     session.save_path = "N;/path"
;
; where N is an integer.  Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories.  This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
;         You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
;         use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
;     session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
session.save_path = "C:\TribalWars\dslan_v1.4\tmp"

; Whether to use cookies.
session.use_cookies = 1

; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1

; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

; The domain for which the cookie is valid.
session.cookie_domain =

; Handler used to serialize data.  php is the standard serializer of PHP.
session.serialize_handler = php

; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.

session.gc_probability = 1
session.gc_divisor     = 100

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
;       (see session.save_path above), then garbage collection does *not*
;       happen automatically.  You will need to do your own garbage
;       collection through a shell script, cron entry, or some other method.
;       For example, the following script would is the equivalent of
;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
;          cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.

session.bug_compat_42 = 1
session.bug_compat_warn = 1

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =

; How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
;   to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
;   in publically accessible computer.
; - User may access your site with the same session ID
;   always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0

; Select a hash function
; 0: MD5   (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
;
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 4

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs.  If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links.  -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent).  -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647.  Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch.  0 = all records in one batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don't bail out by default.
;assert.bail = Off

; User-function to be called if an assertion fails.
;assert.callback = 0

; Eval the expression with current error_reporting().  Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0

[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"

; Default port to connect to.
pfpro.defaultport = 443

; Default timeout in seconds.
pfpro.defaulttimeout = 30

; Default proxy IP address (if required).
;pfpro.proxyaddress =

; Default proxy port.
;pfpro.proxyport =

; Default proxy logon.
;pfpro.proxylogon =

; Default proxy password.
;pfpro.proxypassword =

[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true

[mbstring]
; language for internal character representation.
;mbstring.language = Japanese

; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP

; http input encoding.
;mbstring.http_input = auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS

; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
;       portable libs/applications.
;mbstring.encoding_translation = Off

; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto

; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;

; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000

[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel    = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel    = JIS

[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg

; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off

[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="C:\TribalWars\dslan_v1.4\tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400

[mime_magic]
mime_magic.magicfile = "C:\TribalWars\dslan_v1.4\php\extras\magic.mime"
;mime_magic.debug = On


[eAccelerator]
extension=eaccelerator.dll
eaccelerator.shm_size = "0"
eaccelerator.cache_dir = "C:\TribalWars\dslan_v1.4\tmp"
eaccelerator.enable = "1"
eaccelerator.optimizer = "0"
eaccelerator.debug = "0"
eaccelerator.check_mtime = "1"
eaccelerator.filter = ""
eaccelerator.shm_max = "0"
eaccelerator.shm_ttl = "0"
eaccelerator.shm_prune_period = "0"
eaccelerator.shm_only = "0"
eaccelerator.compress = "1"
eaccelerator.compress_level = "9"
eaccelerator.keys = "shm_and_disk"
eaccelerator.sessions = "shm_and_disk"
eaccelerator.content = "shm_and_disk"
eaccelerator.admin.name =
eaccelerator.admin.password =

[Zend]
;zend_extension_ts = "C:\TribalWars\dslan_v1.4\php\zendOptimizer\lib\ZendExtensionManager.dll"
;zend_extension_manager.optimizer_ts = "C:\TribalWars\dslan_v1.4\php\zendOptimizer\lib\Optimizer"
;zend_optimizer.enable_loader = 0
;zend_optimizer.optimization_level=15
;zend_optimizer.license_path =


; Local Variables:
; tab-width: 4
; End:
Reply
#8
Ok, everything seems alright, the extension just doesn't get loaded. Try running setup_xampp.bat.
Reply
#9
[Image: WD8aZ.png]
Nothink happened. Tried to run dslan_start.bat and the same problems appeared.
Reply
#10
The server/php log might help, but I don't know where they are located. :/
They should be something like php.log, httpd.log or apache.log. If you find them somewhere, upload it please.
Reply
#11
They only log that seems to be interesting is in dslan/apache/logs/error.log.

Code:
[Sat Nov 10 16:42:21 2012] [notice] Apache/2.2.3 (Win32) DAV/2 mod_ssl/2.2.3 OpenSSL/0.9.8g mod_autoindex_color PHP/4.4.2 configured -- resuming normal operations
[Sat Nov 10 16:42:21 2012] [notice] Server built: Sep 30 2006 21:24:06
[Sat Nov 10 16:42:21 2012] [notice] Parent: Created child process 524
[Sat Nov 10 16:42:22 2012] [notice] Child 524: Child process is running
[Sat Nov 10 16:42:22 2012] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Sat Nov 10 16:42:22 2012] [notice] Child 524: Acquired the start mutex.
[Sat Nov 10 16:42:22 2012] [notice] Child 524: Starting 250 worker threads.
[Sat Nov 10 16:42:22 2012] [notice] Child 524: Exit event signaled. Child process is ending.
[Sat Nov 10 16:42:22 2012] [notice] Child 524: Starting thread to listen on port 443.
[Sat Nov 10 16:42:22 2012] [notice] Child 524: Starting thread to listen on port 80.
[Sat Nov 10 16:42:23 2012] [notice] Child 524: Released the start mutex
[Sat Nov 10 16:42:24 2012] [notice] Child 524: Waiting for 250 worker threads to exit.
[Sat Nov 10 16:42:24 2012] [notice] Child 524: All worker threads have exited.
[Sat Nov 10 16:42:24 2012] [notice] Child 524: Child process is exiting
[Sat Nov 10 16:42:24 2012] [notice] Parent: Child process exited successfully.
[Sat Nov 10 17:05:14 2012] [notice] Apache/2.2.3 (Win32) DAV/2 mod_ssl/2.2.3 OpenSSL/0.9.8g mod_autoindex_color PHP/4.4.2 configured -- resuming normal operations
[Sat Nov 10 17:05:14 2012] [notice] Server built: Sep 30 2006 21:24:06
[Sat Nov 10 17:05:14 2012] [notice] Parent: Created child process 4344
[Sat Nov 10 17:05:16 2012] [notice] Child 4344: Child process is running
[Sat Nov 10 17:05:16 2012] [notice] Child 4344: Acquired the start mutex.
[Sat Nov 10 17:05:16 2012] [notice] Child 4344: Starting 250 worker threads.
[Sat Nov 10 17:05:16 2012] [notice] Child 4344: Starting thread to listen on port 443.
[Sat Nov 10 17:05:16 2012] [notice] Child 4344: Starting thread to listen on port 80.
[Sat Nov 10 17:05:18 2012] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Sat Nov 10 17:05:18 2012] [notice] Child 4344: Exit event signaled. Child process is ending.
[Sat Nov 10 17:05:19 2012] [notice] Child 4344: Released the start mutex
[Sat Nov 10 17:05:20 2012] [notice] Child 4344: Waiting for 250 worker threads to exit.
[Sat Nov 10 17:05:20 2012] [notice] Child 4344: All worker threads have exited.
[Sat Nov 10 17:05:20 2012] [notice] Child 4344: Child process is exiting
[Sat Nov 10 17:05:20 2012] [notice] Parent: Child process exited successfully.
Reply
#12
Nothing useful there.
Reply
#13
Hmmm,

I can't find anythink else.

I want you to notice that in my sisters computer which runs Vista dslan works perfect. However in my computer which runs Windows 7 32bit it won't work.

Is there anythink I can do to play it?

So far,
fakeproduct.
Another log found:

Code:
127.0.0.1 - - [10/Nov/2012:18:46:58 +0200] "GET / HTTP/1.1" 200 153
127.0.0.1 - - [10/Nov/2012:18:46:58 +0200] "GET /favicon.ico HTTP/1.1" 404 1118
127.0.0.1 - - [10/Nov/2012:18:47:00 +0200] "GET / HTTP/1.1" 200 153
127.0.0.1 - - [10/Nov/2012:18:47:00 +0200] "GET /favicon.ico HTTP/1.1" 404 1118
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin HTTP/1.1" 301 374
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/ HTTP/1.1" 200 2063
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/js/querywindow.js HTTP/1.1" 200 10252
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/left.php?lang=en-utf-8&convcharset=iso-8859-1&collation_connection=utf8_unicode_ci&token=f7ac8e3411ecd78768fd10ebbfcdf83c HTTP/1.1" 200 3470
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/main.php?lang=en-utf-8&convcharset=iso-8859-1&collation_connection=utf8_unicode_ci&token=f7ac8e3411ecd78768fd10ebbfcdf83c HTTP/1.1" 200 33870
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/css/phpmyadmin.css.php?token=f7ac8e3411ecd78768fd10ebbfcdf83c&js_frame=left HTTP/1.1" 200 14543
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/js/tooltip.js HTTP/1.1" 200 5168
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/xampp/img/logo_left.png HTTP/1.1" 200 4370
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/xampp/img/b_home.png HTTP/1.1" 200 370
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/xampp/img/b_selboard.png HTTP/1.1" 200 274
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/xampp/img/b_docs.png HTTP/1.1" 200 292
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/xampp/img/b_sqlhelp.png HTTP/1.1" 200 287
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/css/phpmyadmin.css.php?token=f7ac8e3411ecd78768fd10ebbfcdf83c&js_frame=right HTTP/1.1" 200 24285
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/logo_right.png HTTP/1.1" 200 5658
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/item_ltr.png HTTP/1.1" 200 173
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_host.png HTTP/1.1" 200 316
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_asci.png HTTP/1.1" 200 254
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/xampp/img/b_help.png HTTP/1.1" 200 229
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/b_newdb.png HTTP/1.1" 200 408
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_status.png HTTP/1.1" 200 313
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_vars.png HTTP/1.1" 200 306
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_process.png HTTP/1.1" 200 362
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/b_engine.png HTTP/1.1" 200 362
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_reload.png HTTP/1.1" 200 245
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_rights.png HTTP/1.1" 200 512
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_db.png HTTP/1.1" 200 285
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/b_export.png HTTP/1.1" 200 313
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/b_import.png HTTP/1.1" 200 310
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_lang.png HTTP/1.1" 200 422
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/xampp/img/b_info.png HTTP/1.1" 200 234
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/s_theme.png HTTP/1.1" 200 737
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/b_docs.png HTTP/1.1" 200 292
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/original/img/b_home.png HTTP/1.1" 200 370
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/themes/xampp/img/window-new.png HTTP/1.1" 200 583
127.0.0.1 - - [10/Nov/2012:18:47:05 +0200] "GET /phpmyadmin/css/print.css?token=f7ac8e3411ecd78768fd10ebbfcdf83c HTTP/1.1" 200 1063
127.0.0.1 - - [10/Nov/2012:18:47:06 +0200] "GET /phpmyadmin/favicon.ico HTTP/1.1" 200 18902
127.0.0.1 - - [10/Nov/2012:18:47:09 +0200] "GET /phpmyadmin/left.php?server=1&db=lan&table=&lang=en-utf-8&collation_connection=utf8_unicode_ci HTTP/1.1" 200 19188
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/js/functions.js HTTP/1.1" 200 40667
127.0.0.1 - - [10/Nov/2012:18:47:09 +0200] "GET /phpmyadmin/db_details_structure.php?server=1&db=lan&table=&lang=en-utf-8&collation_connection=utf8_unicode_ci HTTP/1.1" 200 86917
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/css/phpmyadmin.css.php?token=f7ac8e3411ecd78768fd10ebbfcdf83c&js_frame=left HTTP/1.1" 200 14543
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/css/phpmyadmin.css.php?token=f7ac8e3411ecd78768fd10ebbfcdf83c&js_frame=right HTTP/1.1" 200 24285
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_sbrowse.png HTTP/1.1" 200 197
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/s_host.png HTTP/1.1" 200 316
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/item_ltr.png HTTP/1.1" 200 173
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/s_db.png HTTP/1.1" 200 285
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_sql.png HTTP/1.1" 200 322
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_props.png HTTP/1.1" 200 294
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_search.png HTTP/1.1" 200 605
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_export.png HTTP/1.1" 200 313
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_import.png HTTP/1.1" 200 310
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_tblops.png HTTP/1.1" 200 345
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/s_rights.png HTTP/1.1" 200 512
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_deltbl.png HTTP/1.1" 200 364
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_tipp.png HTTP/1.1" 200 308
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/bd_browse.png HTTP/1.1" 200 265
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/bd_select.png HTTP/1.1" 200 524
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/bd_empty.png HTTP/1.1" 200 298
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_drop.png HTTP/1.1" 200 311
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_insrow.png HTTP/1.1" 200 283
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_browse.png HTTP/1.1" 200 265
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_select.png HTTP/1.1" 200 540
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_empty.png HTTP/1.1" 200 298
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/arrow_ltr.png HTTP/1.1" 200 277
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_print.png HTTP/1.1" 200 574
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_tblanalyse.png HTTP/1.1" 200 296
127.0.0.1 - - [10/Nov/2012:18:47:10 +0200] "GET /phpmyadmin/themes/xampp/img/b_newtbl.png HTTP/1.1" 200 409
127.0.0.1 - - [10/Nov/2012:18:47:12 +0200] "GET /phpmyadmin/main.php?db=lan&token=f7ac8e3411ecd78768fd10ebbfcdf83c HTTP/1.1" 200 33881
127.0.0.1 - - [10/Nov/2012:18:47:12 +0200] "GET /phpmyadmin/css/phpmyadmin.css.php?token=f7ac8e3411ecd78768fd10ebbfcdf83c&js_frame=right HTTP/1.1" 200 24285
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/tbl_properties_structure.php?db=lan&token=f7ac8e3411ecd78768fd10ebbfcdf83c&table=ally HTTP/1.1" 200 70441
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/css/phpmyadmin.css.php?token=f7ac8e3411ecd78768fd10ebbfcdf83c&js_frame=right HTTP/1.1" 200 24285
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/s_tbl.png HTTP/1.1" 200 252
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/b_tblexport.png HTTP/1.1" 200 283
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/original/img/error.ico HTTP/1.1" 200 318
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/css/themes/original/img/error.ico HTTP/1.1" 404 1436
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/b_tblimport.png HTTP/1.1" 200 280
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/b_edit.png HTTP/1.1" 200 451
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/b_primary.png HTTP/1.1" 200 416
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/b_unique.png HTTP/1.1" 200 281
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/bd_ftext.png HTTP/1.1" 200 277
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/b_index.png HTTP/1.1" 200 315
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/b_ftext.png HTTP/1.1" 200 277
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/bd_primary.png HTTP/1.1" 200 389
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/bd_unique.png HTTP/1.1" 200 287
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/bd_index.png HTTP/1.1" 200 315
127.0.0.1 - - [10/Nov/2012:18:47:15 +0200] "GET /phpmyadmin/themes/xampp/img/b_relations.png HTTP/1.1" 200 280
127.0.0.1 - - [10/Nov/2012:18:47:17 +0200] "GET /phpmyadmin/tbl_properties_structure.php?db=lan&token=f7ac8e3411ecd78768fd10ebbfcdf83c&table=ally_contracts HTTP/1.1" 200 36281
127.0.0.1 - - [10/Nov/2012:18:47:17 +0200] "GET /phpmyadmin/css/phpmyadmin.css.php?token=f7ac8e3411ecd78768fd10ebbfcdf83c&js_frame=right HTTP/1.1" 200 24285
127.0.0.1 - - [10/Nov/2012:18:47:17 +0200] "GET /phpmyadmin/css/themes/original/img/error.ico HTTP/1.1" 404 1456
127.0.0.1 - - [10/Nov/2012:18:47:19 +0200] "GET /phpmyadmin/tbl_properties_structure.php?db=lan&token=f7ac8e3411ecd78768fd10ebbfcdf83c&table=ally HTTP/1.1" 200 70441
127.0.0.1 - - [10/Nov/2012:18:47:19 +0200] "GET /phpmyadmin/css/phpmyadmin.css.php?token=f7ac8e3411ecd78768fd10ebbfcdf83c&js_frame=right HTTP/1.1" 200 24285
127.0.0.1 - - [10/Nov/2012:18:47:19 +0200] "GET /phpmyadmin/css/themes/original/img/error.ico HTTP/1.1" 404 1436
127.0.0.1 - - [10/Nov/2012:18:47:21 +0200] "GET / HTTP/1.1" 200 153
127.0.0.1 - - [10/Nov/2012:18:47:21 +0200] "GET /favicon.ico HTTP/1.1" 404 1118
127.0.0.1 - - [10/Nov/2012:18:48:36 +0200] "GET / HTTP/1.1" 200 153
127.0.0.1 - - [10/Nov/2012:18:48:36 +0200] "GET /favicon.ico HTTP/1.1" 404 1118
127.0.0.1 - - [11/Nov/2012:13:11:44 +0200] "GET / HTTP/1.1" 200 153
127.0.0.1 - - [11/Nov/2012:13:11:44 +0200] "GET /favicon.ico HTTP/1.1" 404 1118
127.0.0.1 - - [11/Nov/2012:13:15:57 +0200] "GET / HTTP/1.1" 200 153
127.0.0.1 - - [11/Nov/2012:13:15:57 +0200] "GET /favicon.ico HTTP/1.1" 404 1118
127.0.0.1 - - [11/Nov/2012:13:18:30 +0200] "GET / HTTP/1.1" 200 153
127.0.0.1 - - [11/Nov/2012:13:18:30 +0200] "GET /favicon.ico HTTP/1.1" 404 1118
127.0.0.1 - - [11/Nov/2012:13:18:32 +0200] "GET / HTTP/1.1" 200 153
127.0.0.1 - - [11/Nov/2012:13:18:32 +0200] "GET /favicon.ico HTTP/1.1" 404 1118
Reply
#14
Umm can someone help me?
[Image: 6a7a8ab756894695a46e845.png]
Reply
#15
Did you install another PHP-Version on your PC?
I've got the same error when I installed PHP 5 on my pc ...

so far
Yannici
Manchmal denke ich:
Reply
#16
In some way, yes It's true.

This problem occured when php updated (I think). Is it ok to install like php 4 and test it again?
Hey I wanted to know, if it's safe to install php4.4.4 from php5.3.

Can I try it and test it out?
[Image: 6a7a8ab756894695a46e845.png]
Reply




Users browsing this thread: 1 Guest(s)